Using your Sweet-Stick is easy, safe and takes no special  skills. To apply the proper edge between traditional  sharpening follow these steps to insure a good edge every time.

1.-2. Hold the Sweet-Stick between your forefinger & thumb (thumb on top)



3. In your opposite hand, hold the skate upside down (blade facing up) with the toe of the skate facing away from your body



4.-6. Next hold the Sweet-Stick on a slight angle, and place the "V" of  the ceramic on the toe of the blade and "lightly drag" the Sweet-Stick down the length of the blade from toe to heel





7. That's it! one (maybe two) strokes on each skate should do it.
Remember, you don't need a lot of pressure on the Sweet-Stick, the ceramic does all the work. After a few tries you'll have it dialed in and know exactly how much pressure you need to  get back that bite!

Example video
 

De-Burring - Inside
Hold the Sweet-Stick as shown and run the tip down the inside of the hollow until the burr is removed



De-Burring - Outside
Hold the Sweet-Stick as shown and run the side of the tip down the outside of the blade in the area of the burr.

© Copyright Bracun Oy

WHAT MAKES THE SWEET-STICK WORK SO WELL

DOES THE SWEET-STICK REPLACE SHARPENING

WHEN SHOULD I HAVE MY SKATES SHARPENED